Selling Price -
$497,000.00
- Kernel Processor:Yes
- Axle:No PRWD
- 800/70R38
- 750/65R15
- MITAS
- PRODRIVE
- LEATHER
- FOOTPEGS
- POWER MIRRORS
- PREM LED LIGHTS
- PREM RADIO
- I COMPLETE
- AHC
- AUTO PTO COUPLER
- AUTOLUBE
- DUAL HDR DRIVE
- HD HDR DRIVE
- DURALINE ULTIMATE
- KERNEL PROCESSOR
- 48 KNIVES
- GRASS KNIVES + SHEARBAR
- DURALINE CH KNIFE BRACKET
- HIGH ARCH SPOUT
- 14 WEIGHT PLATES
- AUTO SPOUT POSITION
- SPOUT CAMERA
- REFRIGERATOR
- FULL WIPERS
- PREM LED SERV LTS
- PREM LED WORK LTS
- LED BEACONS
- STONE DETECTION
- ELECTRIC KP ADJ
- KP CRANE
- ACTIVEFILL CONTROL
- AIR COMPRESSOR
- CHROME EXHAUST
- ADDITIVE TANK & DOSING
- ADDITIVE DOSING TWINLINE
- 40% SPEED DIFF
- 10 ROW EXT & AFC HARNESS
- 659 HAY HEADER (1KM0659GHKK133993)
- AMS: 2630
- SF1
- 2019
- John Deere
- 8400
- Base
- General
- 6090HZ013
- John Deere PowerTech™
- PSX
- Rated @ 2100 rpm: 495 hp (502 ps) | Maximum power @ 1800 rpm: 532 hp (540 ps) | Engine RPM on road: 1140-2100
- Tier 4 fnal
- 13.5 L
- In-line 6
- fan drive: Direct
- Dura-Drum™ Cutterhead: 1100 rpm
- Unit Injectors + 4 valves
- Dry Clutch
- Number of discs: 1 | Main driveband: Re-inforced with kevlar inserts | Belt tensioning: Active, hydraulic pressure | Main polybelt driveband: no. of belts: 6
- Hydrostatic, 3 speed - manual shift, helical gears
- Maximum: 12.4 / 15.5 / 18.6 mph (20 / 25 / 30 km/h) | Speed differential Upper/Lower: 32 % | Speed @ rated: 1800 rpm
- 710/70R42
- 620/60R30
- Frame opening: Swing-away, 37-45 degree angle | Roll spacing: 1.0 - 5.0 mm | Spout Rotation: 210° | Spout Reach from center line: 15.5 ft
- Feed Rolls, front: 26 in | Cutterhead housing: 27 in | Cutterhead w/ knives: 26.7/26.3 in | Kernel Processor, 118 tooth serrated roll, Quick KP swing in/out Roll width: 25, 9.5 in
- / Housing Width: 23 / 21 in
- of Cut: 40 knives: 7 - 26 mm (.275 - 1.0 in) 1 mm (.04) increments | 48 knives: 6 - 22 mm (.24 - .87 in) 1 mm (.04) increments
- (w/o header) 21.4 ft
- (w/o header) 9.84 -11.5 ft
- (to cab roof) 12.75 ft
- Working: 22 ft
- 290 gallon (1100 L) | Large volume innoculant tank: 95 gallon
- 13 gallon
- Feed Rolls Number: 4 | Feed Rolls Metal detector: Standard | Hydro Feed roll drive IVLOC: Standard | Infnitely variable header drive speed: Standard | Number of knives: 40 or 48 | Dura-Drum™ Cutterhead Shear bar, reversible: Standard | KernelStar Kernel Processor, disk type, 240mm diameter Number of disks (top/bottom): 15/14 + 2.5 | Crop Accelerator Number of blades: 10 | Spout Hydraulic raise and lower: Standard
- 1201
- $497,000.00
- Lloydminster
- Pre-Owned
- 619168
- 2019
- John Deere
- 8400
- 1Z08400YTKU619168
- 6090HZ013
- 1827
- Available
- Feed Rolls, front: 26 in | Cutterhead housing: 27 in | Cutterhead w/ knives: 26.7/26.3 in | Kernel Processor, 118 tooth serrated roll, Quick KP swing in/out Roll width: 25, 9.5 in
- Working: 22 ft